Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Naoe, Takashi; Kinoshita, Hidetaka; Wakui, Takashi; Kogawa, Hiroyuki; Haga, Katsuhiro
JAEA-Technology 2022-018, 43 Pages, 2022/08
JAEA-Technology-2022-018.pdf:7.84MB
In the liquid mercury target system for the pulsed spallation neutron source of Materials and Life science experimental Facility (MLF) at the Japan in the Japan Proton Accelerator Research Complex (J-PARC), cavitation that is generated by the high-energy proton beam-induced pressure waves, resulting severe erosion damage on the interior surface of the mercury target vessel. The erosion damage is increased with increasing the proton beam power, and has the possibility to cause the leakage of mercury by the penetrated damage and/or the fatigue failure originated from erosion pits during operation. To achieve the long term stable operation under high-power proton beam, the mitigation technologies for cavitation erosion consisting of surface modification on the vessel interior surface, helium gas microbubble injection, double-walled beam window structure has been applied. The damage on interior surface of the vessel is never observed during the beam operation. Therefore, after the target operation term ends, we have cut out specimen from the target nose of the target vessel to inspect damaged surface in detail for verification of the cavitation damage mitigation technologies and lifetime estimation. We have developed the techniques of specimen cutting out by remote handling under high-radiation environment. Cutting method was gradually updated based on experience in actual cutting for the used target vessel. In this report, techniques of specimen cutting out for the beam entrance portion of the target vessel in high-radiation environment and overview of the results of specimen cutting from actual target vessels are described.
Task Force on Writing Textbook of Nuclear Fuel Materials
JAEA-Review 2020-007, 165 Pages, 2020/07
JAEA-Review-2020-007.pdf:6.63MB
The present textbook was written by Task Force on Writing Textbook of Nuclear Fuel Materials at the Nuclear Science Research Institute in order to improve technological abilities of engineers and researchers who handle nuclear fuel materials. The taskforce consists of young and middle class engineers each having certification for chief engineer of nuclear fuel. The present textbook mainly deals with uranium and plutonium, and shows their nuclear properties, physical and chemical properties, and radiation effects on materials and human body. It also presents basic matters for safety handling of nuclear fuel materials, such as handling of nuclear fuel materials with hood and glovebox, important points in storage and transportation of nuclear fuel materials, radioactive waste management, radiation safety management, and emergency management. Furthermore, incident cases at domestic and foreign nuclear fuel materials facilities are compiled to learn from the past.
Shimazaki, Yosuke; Sawahata, Hiroaki; Shinohara, Masanori; Yanagida, Yoshinori; Kawamoto, Taiki; Takada, Shoji
Journal of Nuclear Science and Technology, 54(2), p.260 - 266, 2017/02
Times Cited Count：2 Percentile：19.37(Nuclear Science & Technology)The High-Temperature engineering Test Reactor (HTTR) has three neutron startup sources (NSs) in the reactor core, each of which consists of 
Cf with 3.7 GBq and is contained in a small capsule, installed in NS holder and subsequently in a control guide block (CR block). The NSs are exchanged at the interval of approximately 7 years. The NS holders are transported from the dealer's hot cell to the reactor facility of HTTR using a transportation container. The loading work of NS holders to the CR blocks is subsequently carried out in the fuel handling machine maintenance pit of HTTR. Technical issues, which are the reduction and prevention of radiation exposure of workers and the exclusion of falling of NS holder, were extracted from the experiences in past two exchange works of NSs to develop a safety handling procedure. Then, a new transportation container special to the NSs of HTTR was developed to solve the technical issues while keeping the cost as low as that for overhaul of conventional container. As the results, the NS handling work using the new transportation container was safely accomplished by developing the new transportation container which can reduce the risks of radiation exposure dose of workers and exclude the falling of NS holder.
Shinohara, Masanori; Ishitsuka, Etsuo; Shimazaki, Yosuke; Sawahata, Hiroaki
JAEA-Technology 2016-033, 65 Pages, 2017/01
JAEA-Technology-2016-033.pdf:11.14MB
To reduce the neutron exposure dose for workers during the replacement works of the startup neutron sources of the High Temperature Engineering Test Reactor, calculations of the exposure dose in case of temporary neutron shielding at the bottom of fuels handling machine were carried out by the PHITS code. As a result, it is clear that the dose equivalent rate due to neutron radiation can be reduced to about an order of magnitude by setting a temporary neutron shielding at the bottom of shielding cask for the fuel handling machine. In the actual replacement works, by setting temporary neutron shielding, it was achieved that the cumulative equivalent dose of the workers was reduced to 0.3 man mSv which is less than half of cumulative equivalent dose for the previous replacement works; 0.7 man mSv.
Tazawa, Yujiro; Nishihara, Kenji; Sugawara, Takanori; Tsujimoto, Kazufumi; Sasa, Toshinobu; Eguchi, Yuta; Kikuchi, Masashi*; Inoue, Akira*
JAEA-Technology 2016-029, 52 Pages, 2016/12
JAEA-Technology-2016-029.pdf:5.34MB
Transmutation Physics Experimental Facility (TEF-P) planned in the J-PARC project uses minor actinide (MA) fuels in the experiments. These MA fuels are highly-radioactive, so the fuel handling equipment in TEF-P is necessary to be designed as remote-handling system. This report summarizes fabrication and test results of the testing equipment for fuel loading that is one of components of the testing equipment for remote-handling of MA fuels. The testing equipment which had a remote-handling system for fuel loading was fabricated. And the test in combination with the mock-up core was performed. Through the test, it was confirmed to load/take the dummy fuel pin to/from the mock-up core without failure. It was shown that the concept design of the fuel loading equipment of TEF-P was reasonable.
Furukawa, Tomohiro; Hirakawa, Yasushi; Kondo, Hiroo; Kanemura, Takuji
Nuclear Materials and Energy (Internet), 9, p.286 - 291, 2016/12
Times Cited Count：5 Percentile：43.12(Nuclear Science & Technology)In order to exchange the components which received irradiation damage during the operation at the International Fusion Materials Irradiation Facility, the adhered lithium, which is partially converted to lithium compounds such as lithium oxide and lithium hydroxide, should be removed from the components. In this study, the dissolution experiments of lithium compounds (lithium nitride, lithium hydroxide, and lithium oxide) were performed in a candidate solvent, allowing the clarification of time and temperature dependence. Based on the results, a cleaning procedure for adhered lithium on the inner surface of the components was proposed.
Sawahata, Hiroaki; Shimazaki, Yosuke; Ishitsuka, Etsuo; Yamazaki, Kazunori; Yanagida, Yoshinori; Fujiwara, Yusuke; Takada, Shoji; Shinozaki, Masayuki; Hamamoto, Shimpei; Tochio, Daisuke
Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 8 Pages, 2016/06
In the HTTR, Cf is loaded in the reactor core as a neutron startup source and changed at frequency. In this exchange work, there were two technical issues; slightly higher radiation exposure of workers by neutron leakage and reliability of neutron source transportation container in handling. To reduce the radiation dose by neutron leakage, detail numerical evaluations using PHITS code were carried out, the effective shielding method for fuel handling machine was proposed. Easily removable polyethylene blocks and particles were used as the neutron shielding, and installed in the cooling paths of the fuel handling machine. As a result, the collective effective dose by neutron was reduced from about 700 man-microSv to about 300 man-microSv. As to the neutron source transportation container, the handling performance was improved and the handling work was safety accomplished by downsizing.
Shimazaki, Yosuke; Ono, Masato; Tochio, Daisuke; Takada, Shoji; Sawahata, Hiroaki; Kawamoto, Taiki; Hamamoto, Shimpei; Shinohara, Masanori
Proceedings of International Topical Meeting on Research Reactor Fuel Management and Meeting of the International Group on Reactor Research (RRFM/IGORR 2016) (Internet), p.1034 - 1042, 2016/03
In High Temperature Engineering Test Reactor (HTTR), three neutron holders containing Cf with 3.7 GBq for each are loaded in the graphite blocks and inserted into the reactor core as a neutron startup source which is changed at the interval of approximately ten years. These neutron holders containing the neutron sources are transported from the dealer's hot cell to HTTR using the transportation container. The holders loading to the graphite block are carried out in the fuel handling machine maintenance pit of HTTR. There were two technical issues for the safety handling work of the neutron holder. The one is the radiation exposure caused by significant movement of the container due to an earthquake, because the conventional transportation container was so large (
1240 mm, h1855 mm) that it can not be fixed on the top floor of maintenance pit by bolts. The other is the falling of the neutron holder caused by the difficult remote handling work, because the neutron holder capsule was also so long (155 mm, h1285 mm) that it can not be pulled into the adequate working space in the maintenance pit. Therefore, a new and low cost transportation container, which can solve the issues, was developed. To avoid the neutron and 
ray exposure, smaller transportation container (820mm, h1150 mm) which can be fixed on the top floor of maintenance pit by bolts was developed. In addition, to avoid the falling of the neutron holder, smaller neutron holder capsule (75 mm, h135 mm) with simple handling mechanism which can be treated easily by manipulator was also developed. As the result of development, the neutron holder handling work was safely accomplished. Moreover, a cost reduction for manufacturing was also achieved by simplifying the mechanism of neutron holder capsule and downsizing.
Chikazawa, Yoshitaka; Kato, Atsushi; Nabeshima, Kunihiko; Otaka, Masahiko; Uzawa, Masayuki*; Ikari, Risako*; Iwasaki, Mikinori*
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 8 Pages, 2015/05
Design study and evaluation for SDC and safety SDG on the BOP of the demonstration JSFR including fuel handling system, power supply system, component cooling water system, building arrangement are reported. For the fuel handling system, enhancement of storage cooling system has been investigated adding diversified cooling systems. For the power supply, existing emergency power supply system has been reinforced and alternative emergency power supply system is added. For the component cooling system and air conditioning, requirements and relation between safety grade components are investigated. Additionally for the component cooling system, design impact when adding decay heat removal system by sea water has been investigated. For reactor building, over view of evaluation on the external events and design policy for distributed arrangement is reported. Those design study and evaluation provides background information of SDC and SDG.
Kikuchi, Mitsuru; Fasoli, A.*; Takizuka, Tomonori*; Diamond, P. H.*; Medvedev, S.*; Wu, Y.*; Duan, X.*; Kishimoto, Yasuaki*; Hanada, Kazuaki*; Pueschel, M. J.*; et al.
Proceedings of 8th IAEA Technical Meeting on Steady State Operation of Magnetic Fusion Devices (CD-ROM), 20 Pages, 2015/05
The standard D shaped H-mode operation showed excellent plasma confinement ut has important issues of transient and steady state heat flux. To solbe this issues, we proposed new scenario using plasma shaping as one of possible scenario of future tokamak reactor.
Kawashima, Hisato; Sengoku, Seio; Uehara, Kazuya; Tamai, Hiroshi; Shoji, Teruaki*; Ogawa, Hiroaki; Shibata, Takatoshi; Yamamoto, Masahiro*; Miura, Yukitoshi; Kusama, Yoshinori; et al.
Fusion Science and Technology, 49(2), p.168 - 186, 2006/02
Times Cited Count：3 Percentile：24.08(Nuclear Science & Technology)Experimental efforts on JFT-2M have been devoted to understand SOL/Divertor plasmas and to investigate power and particle controllability. Open divertor configuration was used for the first decade of JFT-2M started in 1984. We found out the SOL/Divertor plasma properties such as in/out asymmetry, heat and particle diffusivities, and SOL current at ELMs. Handling of power and particle was demonstrated by active control methods such as local pumping, edge ergodization, divertor biasing, and edge heating. For improvement of power and particle control capability of divertor, it was modified to closed configuration in 1995, which demonstrated the baffling effects with narrower divertor throat. Dense and cold divertor state (n
= 4
10
m
and T = 4 eV), compatible with the improved confinement modes (e.g. H-mode), was realized by strong gas puffing. Being related with the core confinement at H-mode, the edge plasma fluctuations were identified by an electrostatic probe. These are reviewed in this paper.
Teshigawara, Makoto; Aizawa, Hideyuki; Harada, Masahide; Kinoshita, Hidetaka; Meigo, Shinichiro; Maekawa, Fujio; Kaminaga, Masanori; Kato, Takashi; Ikeda, Yujiro
JAERI-Tech 2005-029, 24 Pages, 2005/05
JAERI-Tech-2005-029.pdf:3.38MB
This report introduces the present design status of remote-handling devices for activated and used components such as moderator and reflector in a spallation neutron source of the Material and Life Science Facility (MLF) at J-PARC. The design concept and maintenance scenario are also mentioned. A key maintenance scenario adopts that the used components should be taken out from the MLF to the other storage facility after the volume reduction of them. Almost full remote handling is available to the maintenance work except for the connection/disconnection pipes of the cooling water. Total six remote handling devices are used for moderator-reflector maintenance. They are also available to the proton beam window and muon target maintenance. Maintenance scenario is separated into two works. One is to replace used components to new ones during beam-stop and the other is dispose used components during beam operation. Required period of replacement work is estimated to be 
15 days, on the other hand, the disposal work is 26 days after dry up work (30 days), respectively.
Sakaba, Nariaki; Furusawa, Takayuki; Kawamoto, Taiki; Ishii, Yoshiki; Ota, Yukimaru
Nuclear Engineering and Design, 233(1-3), p.147 - 154, 2004/10
Times Cited Count：11 Percentile：55.63(Nuclear Science & Technology)The HTTR mainly consists of the core components, reactor pressure vessel, cooling systems, instrumentation and control systems, and containment structures. The design of remaining utility systems is described in this paper. They are: auxiliary helium systems which include the helium purification system, the helium sampling system, and the helium storage and supply system; fuel handling and storage system. The helium purification systems are installed in the primary and secondary helium cooling systems in order to reduce the quantity of chemical impurities. The helium sampling systems monitor the concentration of impurities. The helium storage and supply systems keep the steady pressure of the helium system during the normal operation. The fuel handling and storage system is utilised to handle the new and spent fuels safely and reliably.
Nakamura, Hiroo; Riccardi, B.*; Loginov, N.*; Ara, Kuniaki*; Burgazzi, L.*; Cevolani, S.*; Dell'Ocro, G.*; Fazio, C.*; Giusti, D.*; Horiike, Hiroshi*; et al.
Journal of Nuclear Materials, 329-333(1), p.202 - 207, 2004/08
Times Cited Count：14 Percentile：66.01(Materials Science, Multidisciplinary)International Fusion Materials Irradiation Facility (IFMIF), being developed by EU, JA, RF and US, is a deuteron-lithium (Li) reaction neutron source for fusion materials testing. In the end of 2002, 3 year Key Element technology Phase (KEP) to reduce the key technology risk factors has been completed. This paper describes these KEP tasks results. To evaluate Li flow characteristics, a water and Li flow experiments have been done. To develop Li purification system, evaluation of nitrogen and tritium gettering materials have been done. Conceptual design of remote handling and basic experiment have been donde. In addition, safety analysis and diganostics design have been done. In the presentation, the latest design and future prospects will be also summarized.
Oka, Kiyoshi
JAERI-Research 2004-009, 225 Pages, 2004/07
JAERI-Research-2004-009.pdf:47.47MB
In the present paper, I describe the necessary approaches and elemental technologies to solve the issues on the system integration of the typical robot systems for maintenance in the nuclear fusion facility and rescue in the accident of the nuclear power plant facilities. These robots work under the intense radiation condition and restricted space in place of human. In particular, I propose a new approach to realize the system integration of the robot for actual use from the viewpoints of not only the environmental and working conditions but also the restructure and optimization of the required elemental technologies with a well balance in the robot system. Based on the above approach, I have a contribution to realize the robot systems working under the actual conditions for maintenance in the nuclear fusion facility and rescue in the accident of the nuclear power plant facilities.
Kida, Takashi; Sugikawa, Susumu
JAERI-Tech 2004-019, 30 Pages, 2004/03
JAERI-Tech-2004-019.pdf:1.23MB
It is known that hydrazine nitrate used in nuclear fuel reprocessing plants is an unstable substance thermochemically like hydroxylamine nitrate. In order to take the basic data regarding the reaction of hydrazine nitrate with nitric acid, initiation temperatures and heats of this reaction, effect of impurity on initiation temperature and self-accelerating reaction when it holds at constant temperature for a long time were measured by the pressure vessel type reaction calorimeter etc. In this paper, the experimental data and evaluation of the safe handling of hydrazine nitrate in nuclear fuel reprocessing plants are described.
Oka, Kiyoshi
Reza Kenkyu, 31(9), p.612 - 617, 2003/09
no abstracts in English
Oka, Kiyoshi; Shibanuma, Kiyoshi
JAERI-Tech 2003-004, 57 Pages, 2003/03
JAERI-Tech-2003-004.pdf:2.36MB
Cesium is required in order to generate a stable negative ion of hydrogen in an ion source of the neutral beam injector (NBI), which is one of the plasma-heating devices for International Thermonuclear Experimental Reactor (ITER). After long time operation of NBI, the cesium deposits to the insulators supporting the electrode. Due to the deterioration of the insulation resistance, the continuous operation of the NBI will be difficult. In addition, the NBI device is activated by neutron from D-T plasma, so that a periodic removal and cleaning of the cesium on the insulators by remote handling is required. A study of the cesium removal scenario and device is therefore required considering remote handling. In this report, a cesium removal procedure and conceptual design of the cesium removal device using laser ablation technique are studied, and the feasibility of laser ablation is shown.
Kakudate, Satoshi; Shibanuma, Kiyoshi
Fusion Engineering and Design, 65(1), p.33 - 38, 2003/01
Times Cited Count：7 Percentile：45.77(Nuclear Science & Technology)no abstracts in English
Honda, Tsutomu*; Hattori, Yukiya*; Holloway, C.*; Martin, E.*; Matsumoto, Yasuhiro*; Matsunobu, Takashi*; Suzuki, Toshiyuki*; Tesini, A.*; Baulo, V.*; Haange, R.*; et al.
Fusion Engineering and Design, 63-64, p.507 - 518, 2002/12
Times Cited Count：16 Percentile：69.75(Nuclear Science & Technology)The requirement to reduce the construction cost for ITER as compared with the 1998 ITER design, has led to a reduction in the size of the ITER machine and a number of design changes which have an impact on the remote maintenance of ITER. Major components to be considered for remote handling (RH) include the divertor cassettes, shield blanket modules, neutral beamline components, as well as in-port components, which are integrated with the port shield plug such as auxiliary heating equipment, limiters and test blanket modules. The design of the following equipment has been adapted for the smaller machine with reduced access space for the RH equipment: the RH equipment used for the in-vessel RH operationsto be deployed from the casks, the RH equipment that is used to remove the in-port assemblies (port plugs), as well as the remotely operated casks, which can be attached to and removed from vacuum vessel ports by using double -door systems. Defective components are loaded in transfer casks and moved to the hot cell facility by means of a remotely-operated air floatation system attached underneath the cask, where they dock against identical port interfaces and unload the component for remote refurbishment and/or waste storage.
